Year: 2018
Supports & Their Reactions
1. Fixed support : there can be three reactions One vertical reaction One horizontal reaction One moment reaction 2. Hinge/Pin support : there can be two reactions One horizontal reaction One vertical reaction 3. Roller support : there can be one reaction only One vertical reaction 4. Rocker support : there can be one reaction only One vertical reaction
Stiffness Matrix Method
Working Stress Method
This is the traditional method of design, used not only for reinforced concrete but also for structural steel and timber. This method of designed was evolved around the year 1900. This method was accepted by many national codes. India’s code IS:456-1953 was based on this method. It was revised in 1957, 1964, 1978, 2000 and reaffirmed in 2005 and its tenth reprint was in 2007. This method is based on linear elastic theory. This method ensures adequate safety by suitably restricting the stresses in the materials induced by expected working…
Design of Tension Members (PDF)
Download this pdf file for reference and practice purpose or you can also visit our dedicated YouTube channel Technical civil for better and detailed explanation of this topic. Design of Tension members [Download PDF]
Analysis of Tension Members (PDF)
Download this pdf file for you practice and you can also understand this topic with same notes on our dedicated YouTube channel https://www.youtube.com/Technicalcivil Analysis of tension members (Part-1) Download
Limit State Method
In this method of design, the is designed to withstand the safety of for all loads liable to act on it throughout its life, it also satisfied the serviceability requirements such as limitation on deflection and cracking. The aim of design through this method is to achieve acceptable probabilities that structure will become unfit for use to which it is built. It means that it will not reach a limit state or critical state. All relevant limit states should be considered in design to ensure an adequate degree of safety…
Design Of Intze Water Tank PDF
Learn how to design intze water tank with a solved numerical from this pdf file. You can also watch explanatory video based on this pdf file on our Dedicated YouTube channel “Technical civil”.
Estimation of a Residential Building by Long wall Short wall method
Basic Knowledge for every Civil Engineer
This is the very basic and important knowledge that every civil engineer must have. It can be useful at various places of technical as well as practical field. CONCRETE GRADES WITH THEIR MIX PROPORTIONS:M-5 = 1:4:8M-10= 1:3:6M-15= 1:2:4M-20= 1:1.5:3M-25= 1:1:2 CONSIDERATION OF CLEAR COVER TO MAIN REINFORCEMENT:1.FOOTINGS : 50 mm2.RAFT FOUNDATION.TOP : 50 mm3.RAFT FOUNDATION.BOTTOM/SIDES : 75 mm4.STRAP BEAM : 50 mm5.GRADE SLAB : 20 mm6.COLUMN : 40 mm7.SHEAR WALL : 25 mm8.BEAMS : 25 mm9.SLABS : 15 mm10.FLAT SLAB : 20 mm11.STAIRCASE : 15 mm12.RETAINING WALL : 20/ 25…